The WTmax is an electronically operated portable machine tool for the creation of internal cylindrical threadings.

Basically, the WTmax is created according to the specific requirements of the customers and therefore the machining range, pitch length etc. are customized to their needs.

As we all know, there are 2 most important parameters for the creation of the threading: rotation and feeding. These parameters during the creation of the thread must be closely related.

Inside the WTmax, there is a mechanical device, that slides according to the rotation direction that has been set  by giving the tool the axial feeding necessary to create the thread with the correct pitch.

Therefore, by replacing the internal device, the WTmax will create different threads.

The threading diameters and the longitudinal stroke of the machine can be customized.

Threading of large dimensions and deep holes,  any position or angle of the hole, on bodies or on immovable structures. On-site threads for fixed nut screws of any type of step and shape (rectangles, triangles, and circulars)

single phase power
220V~ 50/60Hz
Light on button
Emergency mushroom button
Rotation selector
Rotation STATUS display
Rotation speed adjustment
From 0 to 30 in 10 turns with a mechanical block
Rotation speed display
Rotation motor speed
ST.P. bar
Instant rotation motor load indication, with a functioning block warning signal
Block selector/tool depth unblock
maximum screwing with automatic stop
rotation operation
For brushless motor
Speed loop
Using a resolver

WT Max
Series WT MAX
  • Threading diameter
    110-230 mm (4.33 - 9.06")
  • Tool Holder Shaft Diameter
    60 mm (2.36")
  • Tool Holder Shaft Length
    1500 mm (59.06") With tool locking motor through electronic command
  • Longitudinal Stroke
    350 mm (13.78")
Get a quote
Find out about all the kits and all accessories of the machine